Różnice

Różnice między wybraną wersją a wersją aktualną.

--- pl:novitus_fp_config [2025/02/04 10:55] – [Testing the HTTPS Connection] karolina
+++ pl:novitus_fp_config [2025/07/18 10:04] (aktualna) – [Printer Port Settings] karolina
@@ Linia 13: / Linia 13: @@
 ''Ustawienia -> Konfiguracja -> Polaczenia -> Ustawienia Portow -> PC''
-- Ensure that the "Interfejs" option is set to ''TCP''.
+- Ensure that the "Interfejs" option is set to ''TCP''. - The remaining settings can be configured individually according to your preferences.
 === Enable "NOVITUS" Protocol ===
@@ Linia 159: / Linia 160: @@
 === Testing the HTTPS Connection ===
-To verify that HTTPS is working correctly, follow the same steps as before, but use the https protocol instead of \\
+To verify that HTTPS is working correctly, follow the same steps as before, but use the https: protocol instead of http:
-For example:
-{{ :pl:httpsrequest.png }}
+For example:   {{ :pl:httpsrequest.png }} The response should again indicate a ''StatusCode'' of 200, confirming a successful connection.   {{ :pl:200ok_1_.png }} Additionally, open a web browser and navigate to ''[[https://printerip:configured_port/api/v1]].''
-The response should again indicate a ''StatusCode'' of 200, confirming a successful connection.
-{{ :pl:200ok_1_.png }}
+**Note:** If you are using a custom Root CA, you may need to restart your browser. This ensures that the browser recognizes the newly installed Root CA and does not display certificate warnings. You should see a blank white page, indicating that the printer's API is accessible via HTTPS without any security warnings.
-Additionally, open a web browser and navigate to ''[[https://printerip:configured_port/api/v1]].'' **Note:** If you are using a custom Root CA, you may need to restart your browser. This ensures that the browser recognizes the newly installed Root CA and does not display certificate warnings. You should see a blank white page, indicating that the printer's API is accessible via HTTPS without any security warnings.
 ===== Troubleshooting =====
-If you encounter issues during the setup, here are a few common troubleshooting steps:
-* **Is the printer connected to the local network via an Ethernet cable?** Ensure that the printer is properly connected and powered on.
+If you encounter issues during the setup, here are a few common troubleshooting steps:
-* **Can the printer's IP address be reached from your computer?** Use tools like ''ping'' or ''telnet'' to check the connectivity between your computer and the printer.
-* **Are you able to access the printer's configuration menu?** If not, check the physical connections and restart the printer.//
+  * **Is the printer connected to the local network via an Ethernet cable?** Ensure that the printer is properly connected and powered on.
+  * **Can the printer's IP address be reached from your computer?** Use tools like ''ping'' or ''telnet'' to check the connectivity between your computer and the printer.
+  * **Are you able to access the printer's configuration menu?** If not, check the physical connections and restart the printer.//   //
+===== Ustawienia w Directo =====
+==== 1. Konfiguracja miejsca pracy (drukarka fiskalna) ====
+**Ścieżka:** **''Ustawienia ogólne → Lokalizacje''**
+Należy utworzyć tyle lokalizacji ile jest kas fiskalnych. W wybranej lokalizacji należy:
+  * W polu **Dostawca drukarki** wybrać odpowiedniego dostawcę urządzenia - **Novitus**
+  * W polu **IP internetu:Port **należy wpisać adres IP drukarki i podać numer portu komunikacyjnego
+{{:pl:2yfziyklyp.png}}
+==== 2. Ustawienie stawki VAT na paragonie ====
+Domyślnie drukarka ma przypisaną stawkę **A = 23% VAT**.
+Jeśli na paragonie ma być zastosowana inna stawka VAT
+**Ścieżka:** **''Ustawienia finansowe -> Kody VAT''**
+  * Otwórz kartotekę **Kody VAT**.
+  * W polu **PTU TOWARÓW NA PARAGONIE** przypisz odpowiednią literę (np. A, B, C, itd.) do wybranego kodu VAT.
+  * Upewnij się, że ta litera odpowiada konfiguracji w drukarce fiskalnej (zgodnie z jej dokumentacją techniczną).
+{{:pl:uze2jeg5jp.png}}